Electroless Nickel Plating of Material Surfaces for Ultracold Neutron Storage Traps
5 affiliations
- 1Institute of Nuclear Physics, Ibragimova Str. 1, Almaty 0500032, Kazakhstan
- 2Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research, 6 Joliot Curie, Dubna 141980, Russia
- 3Faculty of Technology of Inorganic Substances and High-Temperature Materials, D. Mendeleev University of Chemical Technology, Moscow 125047, Russia
- 4Institut Max von Laue-Paul Langevin, 71 Av. des Martyrs, F-38042 Grenoble, France
- 5Department of Nuclear Engineering, North Carolina State University, Raleigh, NC 27695, USA
Abstract
Electroless nickel plating of various alloys is one of the most technologically mature methods for producing functional coatings with high corrosion resistance, wear resistance, and stable service performance. In the field of ultracold neutron (UCN) physics, nickel-phosphorus coatings based on the 58Ni isotope are of particular interest. Its exceptionally high neutron optical potential, approximately 342 neV, is substantially higher than that of natural nickel, which is approximately 245.5 neV. At the same time, 58Ni and natural nickel have essentially identical chemical properties and differ only in their nuclear characteristics; therefore, process development and optimization of the deposition procedure can be performed using the more readily available natural nickel. The incorporation of phosphorus decreases the total neutron optical potential to values in the range of 190–220 neV, but makes it possible to modify the magnetic properties of the nickel coating in order to reduce magnetic losses of UCN upon reflection from the surface. Although extensive studies have been devoted to the deposition of Ni-P coatings on aluminum and steel substrates, the formation of high-quality coatings on beryllium- and zirconium-based alloys remains insufficiently investigated. These materials are of particular interest for chambers of superfluid-helium-based UCN sources, since they can reduce activation-related heat loads and ensure efficient cooling of the source to the required temperatures of approximately 1 K under high-radiation-flux conditions. In this work, electroless Ni–P coatings deposited on the surfaces of the aluminum–magnesium alloy AMg6, the aluminum–beryllium alloy AM162H, and the zirconium alloy Zircaloy-4 were systematically investigated, with particular emphasis on AM162H and Zircaloy-4 as promising structural materials for UCN-source chambers. The deposited coatings were comprehensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma optical emission spectrometry (ICP-OES), surface profilometry, instrumented nanoindentation, scratch testing, and electrochemical polarization measurements followed by Tafel analysis. These complementary techniques provided information on the phase-structural state, surface morphology, continuity, thickness, elemental composition, roughness, hardness, elastic modulus, indentation stiffness, adhesion behavior, and corrosion resistance of the coatings. The ICP-OES measurements independently confirmed the compositional trend established by EDS. The coatings deposited on AM162H and Zircaloy-4 exhibited higher hardness and substantially better corrosion resistance than Ni–P/AMg6. Scratch testing indicated satisfactory interfacial adhesion for the coatings on AMg6 and AM162H, whereas the Ni–P/Zircaloy-4 coating exhibited comparatively weaker adhesion to the substrate under the applied test conditions. Particular attention was paid to coating continuity, composition, and thickness because through-thickness defects would expose the substrate, which has a lower neutron optical potential, impurity elements could increase UCN absorption and reduce the neutron optical potential of the coating, and an appropriately selected coating thickness would enable the rational use of the expensive 58Ni isotope. The results provide an experimental basis for further optimization of electroless Ni–P coatings for components of UCN production and storage systems.
Related
- Effect of the Applied Pressure on the Physical and Chemical Properties of Nickel Films Prepared by Electroless Plating on Beech Wood
- Impact of low temperature on the efficacy of chlorous acid water and sodium hypochlorite solution for inactivating avian influenza virus on material surfaces
- Room temperature synthesis of indium tin oxide nanotubes with high precision wall thickness by electroless deposition
- Microstructure and Mechanical Properties of TiAlMoN Coatings Prepared by Arc Ion Plating
- Lithium Plating-Induced Fracture of Individual Graphite Platelets Revealed by Operando
BibTeX
@article{turlybekuly2026electroless,
title = {{Electroless Nickel Plating of Material Surfaces for Ultracold Neutron Storage Traps}},
author = {K. Turlybekuly and E. Fesik and A. Muzychka and V. V. Nesvizhevsky and E. Lychagin and K. Zhernenkov and Zh. Kurmanaliyev and A. Nezvanov and T. Vershinina and R. Kiryanov and A. Koretskiy and E. Korobkina},
journal = {Nanomaterials (Basel, Switzerland)},
year = {2026},
month = sep,
doi = {10.3390/nano16191240},
url = {https://europepmc.org/article/PMC/PMC13667287},
note = {CC BY},
}
RIS
TY - JOUR
TI - Electroless Nickel Plating of Material Surfaces for Ultracold Neutron Storage Traps
AU - K. Turlybekuly
AU - E. Fesik
AU - A. Muzychka
AU - V. V. Nesvizhevsky
AU - E. Lychagin
AU - K. Zhernenkov
AU - Zh. Kurmanaliyev
AU - A. Nezvanov
AU - T. Vershinina
AU - R. Kiryanov
AU - A. Koretskiy
AU - E. Korobkina
PY - 2026
DA - 2026/09/30
JO - Nanomaterials (Basel, Switzerland)
DO - 10.3390/nano16191240
UR - https://europepmc.org/article/PMC/PMC13667287
AB - Electroless nickel plating of various alloys is one of the most technologically mature methods for producing functional coatings with high corrosion resistance, wear resistance, and stable service performance. In the field of ultracold neutron (UCN) physics, nickel-phosphorus coatings based on the 58Ni isotope are of particular interest. Its exceptionally high neutron optical potential, approximately 342 neV, is substantially higher than that of natural nickel, which is approximately 245.5 neV. At the same time, 58Ni and natural nickel have essentially identical chemical properties and differ only in their nuclear characteristics; therefore, process development and optimization of the deposition procedure can be performed using the more readily available natural nickel. The incorporation of phosphorus decreases the total neutron optical potential to values in the range of 190–220 neV, but makes it possible to modify the magnetic properties of the nickel coating in order to reduce magnetic losses of UCN upon reflection from the surface. Although extensive studies have been devoted to the deposition of Ni-P coatings on aluminum and steel substrates, the formation of high-quality coatings on beryllium- and zirconium-based alloys remains insufficiently investigated. These materials are of particular interest for chambers of superfluid-helium-based UCN sources, since they can reduce activation-related heat loads and ensure efficient cooling of the source to the required temperatures of approximately 1 K under high-radiation-flux conditions. In this work, electroless Ni–P coatings deposited on the surfaces of the aluminum–magnesium alloy AMg6, the aluminum–beryllium alloy AM162H, and the zirconium alloy Zircaloy-4 were systematically investigated, with particular emphasis on AM162H and Zircaloy-4 as promising structural materials for UCN-source chambers. The deposited coatings were comprehensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma optical emission spectrometry (ICP-OES), surface profilometry, instrumented nanoindentation, scratch testing, and electrochemical polarization measurements followed by Tafel analysis. These complementary techniques provided information on the phase-structural state, surface morphology, continuity, thickness, elemental composition, roughness, hardness, elastic modulus, indentation stiffness, adhesion behavior, and corrosion resistance of the coatings. The ICP-OES measurements independently confirmed the compositional trend established by EDS. The coatings deposited on AM162H and Zircaloy-4 exhibited higher hardness and substantially better corrosion resistance than Ni–P/AMg6. Scratch testing indicated satisfactory interfacial adhesion for the coatings on AMg6 and AM162H, whereas the Ni–P/Zircaloy-4 coating exhibited comparatively weaker adhesion to the substrate under the applied test conditions. Particular attention was paid to coating continuity, composition, and thickness because through-thickness defects would expose the substrate, which has a lower neutron optical potential, impurity elements could increase UCN absorption and reduce the neutron optical potential of the coating, and an appropriately selected coating thickness would enable the rational use of the expensive 58Ni isotope. The results provide an experimental basis for further optimization of electroless Ni–P coatings for components of UCN production and storage systems.
SN - 2079-4991
ER -