Reassessment of eddy viscosity turbulence models as alternatives to Reynolds stress models for gas cyclone separator CFD simulations
- 1Department of Chemical Engineering, School of Engineering, King Mongkut’s Institute of Technology Ladkrabang
- 2Department of Chemical Technology, Faculty of Science, Chulalongkorn University
- 3Department of Mechanical Engineering, School of Engineering, King Mongkut’s Institute of Technology Ladkrabang
Abstract
Various Reynolds stress turbulence model (RSM) formulations have been widely employed in computational fluid dynamics (CFD) simulations of gas cyclone separators for more than two decades, primarily because they do not rely on the Boussinesq hypothesis (isotropic eddy-viscosity assumption) and can better represent anisotropic turbulence and strongly swirling flows, which simpler eddy-viscosity turbulence models (EVMs) often struggle to capture accurately. But are RSMs truly the only Reynolds-averaged Navier-Stokes (RANS) turbulence models capable of simulating the mean flow in gas cyclone separators? Does their continued popularity result from their actual performance or from modeling bias arising from the Boussinesq (isotropic eddy-viscosity) assumption and the limitations in the discretization approaches (including grid generation and numerical schemes) adopted in previous CFD studies of EVMs? To address these questions, this work compares predictions from several EVMs (Spalart-Allmaras, standard k-epsilon, renormalization group k-epsilon, realizable k-epsilon, standard k-omega, and shear-stress transport k-omega) with and without curvature correction, against those from linear and quadratic pressure-strain RSMs and reference experimental data for a 0.29-m-diameter Stairmand gas cyclone. The results show that appropriate discretization approach enhances the capability of some non-modified EVMs to predict mean velocities in weak-curvature-effect circumstance (e.g., inside the cyclone barrel). Curvature correction improves the mean flow prediction accuracy of EVMs. In addition, caution is advised when applying RANS-predicted root-mean-square velocity fluctuations to describe cyclone flow phenomena. Finally, this study demonstrates that, for the study conditions, the realizable k-epsilon model with curvature correction can provide accuracy comparable to linear and quadratic pressure-strain RSMs in predicting the mean flow in gas cyclone separators while requiring shorter computational time, thereby challenging the long-held preference that RSMs are the only suitable RANS turbulence models for such applications.
Related
- Evaluation of UNI-VAC serum separator, ethylenediaminetetraacetic acid, sodium citrate, and sodium fluoride tubes: A comparison with Becton, Dickinson and Company Vacutainer tubes
- Surgical resection for indeterminate pulmonary nodules in patients with prior breast cancer: diagnostic value and biomarker reassessment
- Brief Report: Reassessment of bTMB as a Predictive Biomarker in NSCLC Immunotherapy—A Reanalysis of OAK and POPLAR
- Transverse compression for the measurement of the tensile strength of pharmaceutical tablets: a reassessment in the case of brittle fracture
- Bridging Conventional and Natural Therapies for Recurrent Aphthous Stomatitis: A Systematic Review and Meta-Analysis of Triamcinolone and Non-Steroidal Alternatives
BibTeX
@article{thongnoi2026reassessment,
title = {{Reassessment of eddy viscosity turbulence models as alternatives to Reynolds stress models for gas cyclone separator CFD simulations}},
author = {Piyawut Thongnoi and Benjapon Chalermsinsuwan and Walairat Chandra-ambhorn and Patthranit Wongpromrat and Amata Anantpinijwatna and Natthawut Ruangtrakoon and Eakarach Bumrungthaichaichan and Santi Wattananusorn},
journal = {Scientific Reports},
year = {2026},
month = jul,
doi = {10.1038/s41598-026-61193-3},
url = {https://doi.org/10.1038/s41598-026-61193-3},
note = {CC BY},
}
RIS
TY - JOUR
TI - Reassessment of eddy viscosity turbulence models as alternatives to Reynolds stress models for gas cyclone separator CFD simulations
AU - Piyawut Thongnoi
AU - Benjapon Chalermsinsuwan
AU - Walairat Chandra-ambhorn
AU - Patthranit Wongpromrat
AU - Amata Anantpinijwatna
AU - Natthawut Ruangtrakoon
AU - Eakarach Bumrungthaichaichan
AU - Santi Wattananusorn
PY - 2026
DA - 2026/07/01
JO - Scientific Reports
DO - 10.1038/s41598-026-61193-3
UR - https://doi.org/10.1038/s41598-026-61193-3
AB - Various Reynolds stress turbulence model (RSM) formulations have been widely employed in computational fluid dynamics (CFD) simulations of gas cyclone separators for more than two decades, primarily because they do not rely on the Boussinesq hypothesis (isotropic eddy-viscosity assumption) and can better represent anisotropic turbulence and strongly swirling flows, which simpler eddy-viscosity turbulence models (EVMs) often struggle to capture accurately. But are RSMs truly the only Reynolds-averaged Navier-Stokes (RANS) turbulence models capable of simulating the mean flow in gas cyclone separators? Does their continued popularity result from their actual performance or from modeling bias arising from the Boussinesq (isotropic eddy-viscosity) assumption and the limitations in the discretization approaches (including grid generation and numerical schemes) adopted in previous CFD studies of EVMs? To address these questions, this work compares predictions from several EVMs (Spalart-Allmaras, standard k-epsilon, renormalization group k-epsilon, realizable k-epsilon, standard k-omega, and shear-stress transport k-omega) with and without curvature correction, against those from linear and quadratic pressure-strain RSMs and reference experimental data for a 0.29-m-diameter Stairmand gas cyclone. The results show that appropriate discretization approach enhances the capability of some non-modified EVMs to predict mean velocities in weak-curvature-effect circumstance (e.g., inside the cyclone barrel). Curvature correction improves the mean flow prediction accuracy of EVMs. In addition, caution is advised when applying RANS-predicted root-mean-square velocity fluctuations to describe cyclone flow phenomena. Finally, this study demonstrates that, for the study conditions, the realizable k-epsilon model with curvature correction can provide accuracy comparable to linear and quadratic pressure-strain RSMs in predicting the mean flow in gas cyclone separators while requiring shorter computational time, thereby challenging the long-held preference that RSMs are the only suitable RANS turbulence models for such applications.
SN - 2045-2322
ER -