Preparation of Customizable Ligand-Functionalized Chitin Biopolymer Adsorbents Utilizing the Azide–Alkyne “Click” Reaction for the Adsorption of Aqueous Cu(II)
- 1Department of Chemistry and Geochemistry, Montana Technological University, 1300 West Park Street, Butte, MT 59701, USA
- 2Department of Biomedical Engineering, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609, USA
Abstract
Chitin is an abundant biopolymer, with 1–3 million tons potentially available annually from shellfish-processing waste, but remains underutilized because its insolubility in conventional solvents makes it difficult to process and functionalize. Herein, a three-step route to chitin adsorbents with interchangeable ligands is reported. Highly acetylated chitin was tosylated and converted to the C-6 azide, and amine- and hydroxyl-terminated ligands were attached to this common intermediate by the copper-catalyzed azide–alkyne cycloaddition (CuAAC) “click” reaction, yielding water-insoluble derivatives. Cu(II) adsorption to the adsorbents was evaluated using inductively coupled plasma optical emission spectrometry (ICP-OES analysis). Under standard conditions (pH 6.0, 4 h contact), amine- and alcohol-chitin adsorbed 30.1 ± 1.3 and 22.3 ± 1.9 mg Cu g−1, respectively, approximately 4.9- and 3.6-fold more than unmodified chitin. Isotherm data were well described by the Langmuir model, with apparent capacities of 37.4 and 25.7 mg g−1 at 4 h contact. The adsorbents could be regenerated with 7% (v/v) HCl, retaining 46% and 42% of their initial uptake after four cycles. The differences in derivatives’ uptakes are attributable to the identity of the grafted ligand, illustrating how the click route allows chitin adsorbents to be tailored through the choice of alkyne.
Related
- Ziziphus Seed-Based Adsorbents: A Review Study on Preparation, Adsorption Mechanisms, and Environmental Applications
- CTAB-functionalized clinoptilolite alginate microbeads for enhanced Congo Red adsorption: performance, kinetics and equilibrium analysis
- Valorization of Rice Husk through the Development of New Materials of Silica Functionalized with Phthaloyl Diamide Ligands: Characterization, Isomer Effect, Ag+ Adsorption Investigation, and Antibacterial Activity
- Artificial neural network-assisted modelling of methylene blue dye adsorption onto ZIF-8 functionalized fishtail palm seed biomass: Isotherm and performance analysis
- Development of hybrid amine-functionalized diatom-based materials for efficient formaldehyde adsorption under dry and humid conditions
BibTeX
@article{berrington2026preparation,
title = {{Preparation of Customizable Ligand-Functionalized Chitin Biopolymer Adsorbents Utilizing the Azide–Alkyne “Click” Reaction for the Adsorption of Aqueous Cu(II)}},
author = {Blaine M. Berrington and Reyla Williams and Richard LaDouceur},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18192450},
url = {https://europepmc.org/article/PMC/PMC13667407},
note = {CC BY},
}
RIS
TY - JOUR
TI - Preparation of Customizable Ligand-Functionalized Chitin Biopolymer Adsorbents Utilizing the Azide–Alkyne “Click” Reaction for the Adsorption of Aqueous Cu(II)
AU - Blaine M. Berrington
AU - Reyla Williams
AU - Richard LaDouceur
PY - 2026
DA - 2026/10/01
JO - Polymers
DO - 10.3390/polym18192450
UR - https://europepmc.org/article/PMC/PMC13667407
AB - Chitin is an abundant biopolymer, with 1–3 million tons potentially available annually from shellfish-processing waste, but remains underutilized because its insolubility in conventional solvents makes it difficult to process and functionalize. Herein, a three-step route to chitin adsorbents with interchangeable ligands is reported. Highly acetylated chitin was tosylated and converted to the C-6 azide, and amine- and hydroxyl-terminated ligands were attached to this common intermediate by the copper-catalyzed azide–alkyne cycloaddition (CuAAC) “click” reaction, yielding water-insoluble derivatives. Cu(II) adsorption to the adsorbents was evaluated using inductively coupled plasma optical emission spectrometry (ICP-OES analysis). Under standard conditions (pH 6.0, 4 h contact), amine- and alcohol-chitin adsorbed 30.1 ± 1.3 and 22.3 ± 1.9 mg Cu g−1, respectively, approximately 4.9- and 3.6-fold more than unmodified chitin. Isotherm data were well described by the Langmuir model, with apparent capacities of 37.4 and 25.7 mg g−1 at 4 h contact. The adsorbents could be regenerated with 7% (v/v) HCl, retaining 46% and 42% of their initial uptake after four cycles. The differences in derivatives’ uptakes are attributable to the identity of the grafted ligand, illustrating how the click route allows chitin adsorbents to be tailored through the choice of alkyne.
SN - 2073-4360
ER -