Nanocomposite of nanocellulose-bentonite for coating urea fertilizer: Towards reducing nitrogen nutrient loss
Abstract
Excessive nitrate leaching in high-rainfall tropical regions significantly reduces fertilizer efficiency, negatively impacting crop productivity and environmental health. To address this challenge, this study developed a controlled-release fertilizer using a nanocellulose-bentonite nanocomposite coating to minimize nutrient loss. Cellulose was extracted from corn husk via alkali treatment and bleaching, followed by nanocellulose preparation through sulfuric acid hydrolysis. Bentonite nanoparticles (Bent) were synthesized via HCl activation and calcination. The nanocellulose-bentonite nanocomposite was produced at three ratios (1:1, 1:5, 1:10 w/w), with X-ray diffraction analysis confirming nanoparticle sizes of 3.788 nm, 7.064 nm, and 28.767 nm, respectively. Fourier-transform infrared spectroscopy confirmed successful nanocomposite formation, while scanning electron microscopy revealed uniform dispersion of bentonite within the nanocellulose matrix. Urea was coated with the composite via immersion, and ammonium (NH 4 + ) release kinetics was evaluated in both soil and aqueous media. Ultra violet-visible spectrophotometer was used to measure NH 4 + concentration in the leachate. Nitrogen release study demonstrated that nanocellulose-bentonite nanocomposite coated urea released only 20.47 % of NH 4 + after 11 days in soil media, compared to 63.13 % from uncoated urea. In water media, coated urea exhibited a gradual release of NH 4
+, reaching a cumulative of 64.72 % after 7 h, while uncoated urea released a cumulative of 27.27 % NH 4 + within the 7 h. The study highlights nanocellulose-bentonite nanocomposite as an effective, ecofriendly coating material for slow-release fertilizers, enhancing nutrient retention and reducing environmental pollution. Further field trials in acidic soils are recommended to validate agronomic performance and plant uptake efficiency.
Related
- Synthesis and characterization of a multifunctional Fe3O4@Mn-MOF@Bentonite nanocomposite for efficient Ca2+ removal from clarified sugar beet juice
- Nitrogen fertilizer use in agroecosystems: current practices, policies and recommendations for efficiency improvement
- Ammonia-oxidizing bacteria dominate active ammonia oxidation during nitrogen fertilizer-induced acidification of a maize-cultivated black soil
- Optimizing nitrogen fertilizer via liquid bio-slurry equivalent ration for hot pepper (Capsicum annum L.) and soil productivity in Amhara Region, Ethiopia
- Design and optimization of a 3D electro-photocatalytic digital-baffle reactor for enhanced copper removal from produced water using Ag₂O/bentonite composite electrodes
BibTeX
@article{mergo2026nanocomposite,
title = {{Nanocomposite of nanocellulose-bentonite for coating urea fertilizer: Towards reducing nitrogen nutrient loss}},
author = {Wakshuma Y Mergo and Nigussie T Ali},
journal = {Next Materials},
year = {2026},
month = oct,
doi = {10.1016/j.nxmate.2025.101539},
url = {https://hal.inrae.fr/hal-05846151v1},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Nanocomposite of nanocellulose-bentonite for coating urea fertilizer: Towards reducing nitrogen nutrient loss
AU - Wakshuma Y Mergo
AU - Nigussie T Ali
PY - 2026
DA - 2026/10/30
JO - Next Materials
DO - 10.1016/j.nxmate.2025.101539
UR - https://hal.inrae.fr/hal-05846151v1
AB - Excessive nitrate leaching in high-rainfall tropical regions significantly reduces fertilizer efficiency, negatively impacting crop productivity and environmental health. To address this challenge, this study developed a controlled-release fertilizer using a nanocellulose-bentonite nanocomposite coating to minimize nutrient loss. Cellulose was extracted from corn husk via alkali treatment and bleaching, followed by nanocellulose preparation through sulfuric acid hydrolysis. Bentonite nanoparticles (Bent) were synthesized via HCl activation and calcination. The nanocellulose-bentonite nanocomposite was produced at three ratios (1:1, 1:5, 1:10 w/w), with X-ray diffraction analysis confirming nanoparticle sizes of 3.788 nm, 7.064 nm, and 28.767 nm, respectively. Fourier-transform infrared spectroscopy confirmed successful nanocomposite formation, while scanning electron microscopy revealed uniform dispersion of bentonite within the nanocellulose matrix. Urea was coated with the composite via immersion, and ammonium (NH 4 + ) release kinetics was evaluated in both soil and aqueous media. Ultra violet-visible spectrophotometer was used to measure NH 4 + concentration in the leachate. Nitrogen release study demonstrated that nanocellulose-bentonite nanocomposite coated urea released only 20.47 % of NH 4 + after 11 days in soil media, compared to 63.13 % from uncoated urea. In water media, coated urea exhibited a gradual release of NH 4 +, reaching a cumulative of 64.72 % after 7 h, while uncoated urea released a cumulative of 27.27 % NH 4 + within the 7 h. The study highlights nanocellulose-bentonite nanocomposite as an effective, ecofriendly coating material for slow-release fertilizers, enhancing nutrient retention and reducing environmental pollution. Further field trials in acidic soils are recommended to validate agronomic performance and plant uptake efficiency.
SN - 2949-8228
ER -