Photon-efficient readout of optical cavity arrays via spatial heterodyne
Abstract
Optical cavity arrays are an emerging tool for efficiently interfacing optical photons to quantum emitters for applications such as quantum computing. In this work, we demonstrate a metrology technique for such cavity arrays by interfering cavity array outputs against a tilted reference beam on a camera, constituting a spatial heterodyne. Both the amplitude and phase of each cavity's transmitted field can be extracted from the resulting images. Enabled by the improved scaling of heterodyne detection over intensity detection in the presence of technical noise, we demonstrate signal-to-noise ratio greater than one down to the single detected photon level, even in the presence of hundreds of noise equivalent photons. This readout technique holds promise for fast, non-destructive imaging of atomic qubits in cavity arrays by requiring fewer scattered photons while allowing the use of fast cameras with higher electronic readout noise.
Related
- Photon-Counting Readout via Electro-Optic Microwave-to-Optical Transduction for Axion Haloscopes
- Surface-Induced Spectral Broadening during Efficient Two-Photon Excitation of Cold 133Cs Atoms near an Optical Nanofiber
- Detector-Frame Quantum Limits for Heterodyne Timing in Relativistic Optical Links
- Homodyne versus heterodyne detection for classifying families of optical quantum states from finite records of detection events
- Quartet state of the neutral nitrogen-vacancy center in diamond and optimized spin readout under near-infrared two-photon excitation
BibTeX
@misc{mcgimpsey2026photonefficient,
title = {{Photon-efficient readout of optical cavity arrays via spatial heterodyne}},
author = {Bridger McGimpsey and Matt Jaffe},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.15827},
eprint = {2610.15827},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.15827},
}
RIS
TY - UNPB
TI - Photon-efficient readout of optical cavity arrays via spatial heterodyne
AU - Bridger McGimpsey
AU - Matt Jaffe
PY - 2026
DA - 2026/10/11
PB - arXiv
DO - 10.48550/arxiv.2610.15827
UR - https://arxiv.org/abs/2610.15827
AB - Optical cavity arrays are an emerging tool for efficiently interfacing optical photons to quantum emitters for applications such as quantum computing. In this work, we demonstrate a metrology technique for such cavity arrays by interfering cavity array outputs against a tilted reference beam on a camera, constituting a spatial heterodyne. Both the amplitude and phase of each cavity's transmitted field can be extracted from the resulting images. Enabled by the improved scaling of heterodyne detection over intensity detection in the presence of technical noise, we demonstrate signal-to-noise ratio greater than one down to the single detected photon level, even in the presence of hundreds of noise equivalent photons. This readout technique holds promise for fast, non-destructive imaging of atomic qubits in cavity arrays by requiring fewer scattered photons while allowing the use of fast cameras with higher electronic readout noise.
ER -