Sucrose-derived carbon spheres for rapid solid-phase extraction and trace cadmium removal from aqueous media
- 1School of Chemical Engineering, Xuzhou College of Industrial Technology
- 2College of Chemistry and Chemical Engineering, Xi’an University of Science and Technology
Abstract
Cadmium (Cd2+) contamination in water remains a major environmental concern, creating a strong demand for sorbents that are both efficient and economically accessible. In this study, uniform carbon spheres (CSs) were prepared from sucrose through a simple hot-oil thermochemical process conducted under ambient pressure, avoiding the need for pressurized equipment. The resulting CSs exhibited a specific surface area of approximately 375 m2 g−1 and were enriched with oxygen-containing functional groups, which are favorable for metal-ion interaction. The adsorption behavior toward Cd2+ was evaluated through equilibrium, kinetic, and solution-condition experiments. The material showed a maximum adsorption capacity of 5.04 mg g−1, and the equilibrium data were best represented by the Langmuir isotherm model, indicating monolayer adsorption on a relatively homogeneous surface. Analysis using the Dubinin–Radushkevich model suggested that Cd2+ uptake occurred predominantly through physical interactions. Kinetic results showed very fast adsorption, with equilibrium reached within 120 s, and the uptake process was better described by the Elovich model. Adsorption performance was most favorable near neutral pH, whereas increased ionic strength and competing ions caused a moderate reduction in Cd2+ uptake, most likely because of site competition and reduced access to active binding sites. In addition, the synthesized CSs demonstrated effective solid-phase extraction (SPE) behavior, enabling rapid separation from the aqueous phase and Cd2+ recovery above 99% after elution with dilute nitric acid. These results suggest that sucrose-derived CSs are a promising low-cost and rapidly acting sorbent for cadmium removal and sample preconcentration in water treatment applications.
Related
- Adsorptive removal of benzo(ghi)perylene from vehicle-wash wastewater using eucalyptus wood waste-derived biochar
- Removal of carbofuran from aqueous solutions using activated carbon derived from Pistacia khinjuk stocks (bıttım) shell waste
- Eco-friendly activated carbon derived from pomegranate peel for amoxicillin removal: batch adsorption, kinetic modeling, and thermodynamics
- Ethylenediaminetriacetic acid-functionalized activated carbon derived from Posidonia oceanica for the removal of Cu(ii).
- Optimization of Turbidity and Organic Matter Removal from Palm Oil Mill Effluent by Batch Adsorption Using Gasification-Derived Pinus patula Biochar
BibTeX
@article{chen2026sucrosederived,
title = {{Sucrose-derived carbon spheres for rapid solid-phase extraction and trace cadmium removal from aqueous media}},
author = {Qunyu Chen and Chuanyong Yan and Jiebing Zhang and Jinrui Zhang},
journal = {Scientific Reports},
year = {2026},
month = jul,
doi = {10.1038/s41598-026-61263-6},
url = {https://doi.org/10.1038/s41598-026-61263-6},
note = {CC BY},
}
RIS
TY - JOUR
TI - Sucrose-derived carbon spheres for rapid solid-phase extraction and trace cadmium removal from aqueous media
AU - Qunyu Chen
AU - Chuanyong Yan
AU - Jiebing Zhang
AU - Jinrui Zhang
PY - 2026
DA - 2026/07/01
JO - Scientific Reports
DO - 10.1038/s41598-026-61263-6
UR - https://doi.org/10.1038/s41598-026-61263-6
AB - Cadmium (Cd2+) contamination in water remains a major environmental concern, creating a strong demand for sorbents that are both efficient and economically accessible. In this study, uniform carbon spheres (CSs) were prepared from sucrose through a simple hot-oil thermochemical process conducted under ambient pressure, avoiding the need for pressurized equipment. The resulting CSs exhibited a specific surface area of approximately 375 m2 g−1 and were enriched with oxygen-containing functional groups, which are favorable for metal-ion interaction. The adsorption behavior toward Cd2+ was evaluated through equilibrium, kinetic, and solution-condition experiments. The material showed a maximum adsorption capacity of 5.04 mg g−1, and the equilibrium data were best represented by the Langmuir isotherm model, indicating monolayer adsorption on a relatively homogeneous surface. Analysis using the Dubinin–Radushkevich model suggested that Cd2+ uptake occurred predominantly through physical interactions. Kinetic results showed very fast adsorption, with equilibrium reached within 120 s, and the uptake process was better described by the Elovich model. Adsorption performance was most favorable near neutral pH, whereas increased ionic strength and competing ions caused a moderate reduction in Cd2+ uptake, most likely because of site competition and reduced access to active binding sites. In addition, the synthesized CSs demonstrated effective solid-phase extraction (SPE) behavior, enabling rapid separation from the aqueous phase and Cd2+ recovery above 99% after elution with dilute nitric acid. These results suggest that sucrose-derived CSs are a promising low-cost and rapidly acting sorbent for cadmium removal and sample preconcentration in water treatment applications.
SN - 2045-2322
ER -