Influence of Shelf-Aging on Resistive Switching Characteristics of Sol–Gel-Processed ZnO and Al-Doped ZnO Structures
- 1Department of Semiconductor Engineering, Gachon University, Seongnam-si 13120, Gyeonggi-do, Republic of Korea
Abstract
Sol–gel-processed zinc oxide (ZnO) is indispensable in various optoelectronic applications, such as quantum dot light-emitting diodes (QLEDs), due to its high electron transport capability and adjustable oxygen vacancy characteristics. However, its commercialization has been delayed by defect-related issues and a high sensitivity to fabrication conditions. ZnO exhibits complex aging behaviors, notably ‘shelf-aging,’ where device properties change unpredictably over time even without external stimuli. Recent studies suggest that this shelf-aging in QLEDs might relate to the resistive switching (RS) behavior in ZnO, affecting the current conduction mechanism through external bias and internal oxygen dynamics. Despite its significance, systematic studies on the shelf-aging effects in ZnO-based RS structures have been lacking. In this study, we fabricate RS devices using sol–gel-processed ZnO and aluminum-doped ZnO (AZO) as dielectric layers, employing indium tin oxide (ITO) and aluminum (Al) as electrodes—materials commonly utilized in QLEDs. Notably, the Ion/Ioff ratio increased during the initial storage period, reaching the highest measured values after two days for ZnO and three days for AZO, followed by a decrease at later storage times. Further electrical measurements revealed storage-associated changes, while qualitative time-of-flight secondary ion mass spectrometry (TOF-SIMS) profiles showed differences between pristine and archived aged specimens. These observations suggest possible interfacial or defect-related contributions. Overall, this study documents electrical evolution in simplified oxide/Al-containing RS structures during ambient storage with repeated measurements and generates hypotheses for future investigation into complete QLEDs.
Related
- Solution-Processed Ge25S75 and Ge25Se75 Thin Films─Influence of the Solution Preparation Pathway
- Influence of Genotype and Environment on Arabinoxylan Content and Structural Characteristics in Grain and Flour of Organically Grown Winter Rye
- Unveiling the Influence of Graphitic Nanocarbon Structures, Defects, and Surface Functional Groups on Supercapacitive Performance in LiTFSI Electrolyte
- Influence of water content and organic matter on the mechanical strength characteristics of municipal sewage sludge
- From torrefaction to pyrolysis: Influence of bamboo biochar production route on biochar characteristics and the thermal and mechanical performance of polylactic acid biocomposites
BibTeX
@article{moon2026influence,
title = {{Influence of Shelf-Aging on Resistive Switching Characteristics of Sol–Gel-Processed ZnO and Al-Doped ZnO Structures}},
author = {Dongjin Moon and Jaehoon Kim},
journal = {Nanomaterials},
year = {2026},
month = oct,
doi = {10.3390/nano16191263},
url = {https://www.mdpi.com/2079-4991/16/19/1263},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Influence of Shelf-Aging on Resistive Switching Characteristics of Sol–Gel-Processed ZnO and Al-Doped ZnO Structures
AU - Dongjin Moon
AU - Jaehoon Kim
PY - 2026
DA - 2026/10/07
JO - Nanomaterials
DO - 10.3390/nano16191263
UR - https://www.mdpi.com/2079-4991/16/19/1263
AB - Sol–gel-processed zinc oxide (ZnO) is indispensable in various optoelectronic applications, such as quantum dot light-emitting diodes (QLEDs), due to its high electron transport capability and adjustable oxygen vacancy characteristics. However, its commercialization has been delayed by defect-related issues and a high sensitivity to fabrication conditions. ZnO exhibits complex aging behaviors, notably ‘shelf-aging,’ where device properties change unpredictably over time even without external stimuli. Recent studies suggest that this shelf-aging in QLEDs might relate to the resistive switching (RS) behavior in ZnO, affecting the current conduction mechanism through external bias and internal oxygen dynamics. Despite its significance, systematic studies on the shelf-aging effects in ZnO-based RS structures have been lacking. In this study, we fabricate RS devices using sol–gel-processed ZnO and aluminum-doped ZnO (AZO) as dielectric layers, employing indium tin oxide (ITO) and aluminum (Al) as electrodes—materials commonly utilized in QLEDs. Notably, the Ion/Ioff ratio increased during the initial storage period, reaching the highest measured values after two days for ZnO and three days for AZO, followed by a decrease at later storage times. Further electrical measurements revealed storage-associated changes, while qualitative time-of-flight secondary ion mass spectrometry (TOF-SIMS) profiles showed differences between pristine and archived aged specimens. These observations suggest possible interfacial or defect-related contributions. Overall, this study documents electrical evolution in simplified oxide/Al-containing RS structures during ambient storage with repeated measurements and generates hypotheses for future investigation into complete QLEDs.
SN - 2079-4991
ER -