Impact of bubble nucleation on the functioning of the pulsating heat pipe: numerical simulation study
Abstract
In this communication, we discuss results obtained with the numerical in-house PHP simulation code CASCO (French abbreviation for Advanced PHP simulation code). The aim is to study the impact of bubble generation (boiling) on the established oscillation of a PHP with a high turn number (10-turn water-copper tubular PHP with independently heated turns in the evaporator region). We vary the nucleation barrier value, i.e. the local superheating ΔTnucl at which the nucleation occurs and the heat load Pe; other simulation parameters are kept constant. The PHP heat transfer performance is evaluated with the PHP thermal resistance Rth for both horizontal and vertical favorable PHP orientation. Since the bubble generation plays a positive role for the PHP functioning, one expects that the function Rth(ΔTnucl) monotonously increases. This is true for high ΔTnucl. For small ΔTnucl, the Rth(ΔTnucl) function is decreasing, thus a minimum occurs. It appears because of a transition between the regimes of stable PHP functioning. The regimes strongly differ by the average penetration of liquid plugs into the evaporator. For horizontal PHP, these regimes correspond to the intermittent and continuous oscillations. The regimes are discussed and the regime map in the coordinates Pe -ΔTnucl is obtained.
Related
- Substrate-induced crystallisation in polymers: Exceptional impact of prefreezing versus heterogeneous nucleation on kinetics and morphology
- Numerical simulation of flow over flapping wings in tandem: Wingspan effects
- Wave-optics numerical simulation of atmospheric turbulence in 10,000-km-scale satellite–ground optical links with spatially adaptive phase screens
- Thermally stimulated depolarization in hafnium oxide: experiment and numerical simulation
- Numerical simulation of biological capsules based on interface-fitted polygonal meshes
BibTeX
@misc{nikolayev2026impact,
title = {{Impact of bubble nucleation on the functioning of the pulsating heat pipe: numerical simulation study}},
author = {Vadim Nikolayev and Iaroslav Nekrashevych},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.06901},
eprint = {2610.06901},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.06901},
}
RIS
TY - UNPB
TI - Impact of bubble nucleation on the functioning of the pulsating heat pipe: numerical simulation study
AU - Vadim Nikolayev
AU - Iaroslav Nekrashevych
PY - 2026
DA - 2026/10/01
PB - arXiv
DO - 10.48550/arxiv.2610.06901
UR - https://arxiv.org/abs/2610.06901
AB - In this communication, we discuss results obtained with the numerical in-house PHP simulation code CASCO (French abbreviation for Advanced PHP simulation code). The aim is to study the impact of bubble generation (boiling) on the established oscillation of a PHP with a high turn number (10-turn water-copper tubular PHP with independently heated turns in the evaporator region). We vary the nucleation barrier value, i.e. the local superheating ΔTnucl at which the nucleation occurs and the heat load Pe; other simulation parameters are kept constant. The PHP heat transfer performance is evaluated with the PHP thermal resistance Rth for both horizontal and vertical favorable PHP orientation. Since the bubble generation plays a positive role for the PHP functioning, one expects that the function Rth(ΔTnucl) monotonously increases. This is true for high ΔTnucl. For small ΔTnucl, the Rth(ΔTnucl) function is decreasing, thus a minimum occurs. It appears because of a transition between the regimes of stable PHP functioning. The regimes strongly differ by the average penetration of liquid plugs into the evaporator. For horizontal PHP, these regimes correspond to the intermittent and continuous oscillations. The regimes are discussed and the regime map in the coordinates Pe -ΔTnucl is obtained.
ER -