An associated model of Coulomb friction based on the real area of contact
Abstract
Coulomb friction is a non-associated law: it contains a threshold that depends on the contact pressure, i.e. a stress that is not conjugate to any internal variable, hence it admits no dissipation potential in the sense of generalized standard materials (GSM), and the incremental frictional contact problem is not a minimization problem. In this paper, we propose an alternative friction model that retains Coulomb-like behavior while being associated and fully GSM-compatible. Key to our formulation is the introduction of a new internal variable motivated by the microscopic contact state of rough surfaces, whose evolution is driven by the plastic deformation of the asperities. Under a non-decreasing contact pressure and below a threshold pressure, the model recovers Coulomb friction up to an asperity-scale penetration depth. This depth is physically meaningful and can be calibrated to reproduce known tribology results. Under decreasing contact pressures, the model exhibits a memory effect due to irreversible plastic deformation of the asperities, whereas above the pressure threshold it yields a saturation of the frictional traction. We present both penalty and Lagrange multiplier formulations of the model. A 2D finite element implementation of the penalty approach confirms excellent agreement with the classical Coulomb predictions across two benchmark tests.
Related
- Morphological instability and negative geometric friction from contact with active and driven particles
- Hyperbolic dynamic friction models for viscoelastic sliding and rolling contact
- An Arbitrary-Order Augmented Lagrangian Discrete De Rham Scheme for Contact Mechanics with Tresca Friction
- Contact mechanics and friction of soft materials: an apparatus combining multi-axes dynamical actuation/measurement and in situ/in operando visualisation
- Emulating isomerization with two-dimensional Coulomb crystals
BibTeX
@misc{thbaut2026associated,
title = {{An associated model of Coulomb friction based on the real area of contact}},
author = {Manon Thbaut and Laura De Lorenzis},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.08535},
eprint = {2610.08535},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.08535},
note = {CC BY 4.0},
}
RIS
TY - UNPB
TI - An associated model of Coulomb friction based on the real area of contact
AU - Manon Thbaut
AU - Laura De Lorenzis
PY - 2026
DA - 2026/10/06
PB - arXiv
DO - 10.48550/arxiv.2610.08535
UR - https://arxiv.org/abs/2610.08535
AB - Coulomb friction is a non-associated law: it contains a threshold that depends on the contact pressure, i.e. a stress that is not conjugate to any internal variable, hence it admits no dissipation potential in the sense of generalized standard materials (GSM), and the incremental frictional contact problem is not a minimization problem. In this paper, we propose an alternative friction model that retains Coulomb-like behavior while being associated and fully GSM-compatible. Key to our formulation is the introduction of a new internal variable motivated by the microscopic contact state of rough surfaces, whose evolution is driven by the plastic deformation of the asperities. Under a non-decreasing contact pressure and below a threshold pressure, the model recovers Coulomb friction up to an asperity-scale penetration depth. This depth is physically meaningful and can be calibrated to reproduce known tribology results. Under decreasing contact pressures, the model exhibits a memory effect due to irreversible plastic deformation of the asperities, whereas above the pressure threshold it yields a saturation of the frictional traction. We present both penalty and Lagrange multiplier formulations of the model. A 2D finite element implementation of the penalty approach confirms excellent agreement with the classical Coulomb predictions across two benchmark tests.
ER -