Elastic Modulus Distribution in Rigid PU Foams of Elliptically Graded Density
- 1Latvian State Institute of Wood Chemistry, Dzērbenes Street 27, LV-1006 Riga, Latvia
Abstract
Structural and insulating components for automobiles, marine vessels, aircraft, spacecraft and other vehicles and technical devices are often manufactured by foaming rigid polyurethane foams in sealed molds; consequently, it is crucial to understand the physical and mechanical properties of the molded foams. The objective of the study is to evaluate the elastic modulus distribution in rigid polyurethane foams with an elliptically graded density that appears when foaming in a parallelepiped-shaped sealed mold at overpressure. The dependence of the modulus on the density was investigated experimentally under compression, and the constants of the model function were determined. Using the constants, the modulus values were calculated and corresponding distribution maps were plotted for vertical and horizontal cross-sections of the foam block. The results of numerical calculations showed that the modulus distribution is elliptical in vertical sections of the block and circular in horizontal cross-sections. It was concluded that the elliptical symmetry of the density distribution leads to symmetry of the same kind in the elastic properties. The modulus distribution maps are model-based predictions which require an independent experimental spatial validation. The dependence of the aspect ratio of the equidensity and equimodulus ellipses on the aspect ratio of the mold was estimated.
Related
- Out-of-Distribution Inverse Design of Elastic Networks with Differentiable Graph Neural Network Molecular Dynamics
- Effects due to the solvent density distribution on the dynamics of polymer coils in solution under rheological flow fields
- Resolving the Strength–Modulus–Elasticity Tradeoff in Elastomers Using Dual Phase‐Separated Nanodomains
- High Young's modulus NaF coating on bulk Sn: mechanical confinement effect drives durable sodium storage by alleviating (de)sodiation stress.
- Numerical impedance and modulus spectroscopy of CuInSe2 thin-film solar cells: relaxation processes and equivalent-circuit analysis
BibTeX
@article{beverte2026elastic,
title = {{Elastic Modulus Distribution in Rigid PU Foams of Elliptically Graded Density}},
author = {Ilze Beverte and Ugis Cabulis},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18202549},
url = {https://www.mdpi.com/2073-4360/18/20/2549},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Elastic Modulus Distribution in Rigid PU Foams of Elliptically Graded Density
AU - Ilze Beverte
AU - Ugis Cabulis
PY - 2026
DA - 2026/10/16
JO - Polymers
DO - 10.3390/polym18202549
UR - https://www.mdpi.com/2073-4360/18/20/2549
AB - Structural and insulating components for automobiles, marine vessels, aircraft, spacecraft and other vehicles and technical devices are often manufactured by foaming rigid polyurethane foams in sealed molds; consequently, it is crucial to understand the physical and mechanical properties of the molded foams. The objective of the study is to evaluate the elastic modulus distribution in rigid polyurethane foams with an elliptically graded density that appears when foaming in a parallelepiped-shaped sealed mold at overpressure. The dependence of the modulus on the density was investigated experimentally under compression, and the constants of the model function were determined. Using the constants, the modulus values were calculated and corresponding distribution maps were plotted for vertical and horizontal cross-sections of the foam block. The results of numerical calculations showed that the modulus distribution is elliptical in vertical sections of the block and circular in horizontal cross-sections. It was concluded that the elliptical symmetry of the density distribution leads to symmetry of the same kind in the elastic properties. The modulus distribution maps are model-based predictions which require an independent experimental spatial validation. The dependence of the aspect ratio of the equidensity and equimodulus ellipses on the aspect ratio of the mold was estimated.
SN - 2073-4360
ER -