Profiling a Rydberg-Atom Electric Field Sensor for Off-Resonant Detection of Sub-100 MHz RF Signals
Abstract
We present a Rydberg-Atom electric field sensor optimized to detect signals at sub-100 MHz carrier frequencies. The sensing setup employs a sapphire vapor cell that allows for detection of signals below 100~MHz -- typical vapor cells made of glass or quartz demonstrate strong screening of radio frequency (RF) signals in this frequency regime. Applied signals are detected by observing AC Stark shifts in the atomic vapor energy levels. As a test case for the commercial utility of this receiver, we perform our tests at several carrier frequencies in the Industrial, Scientific, and Medical (ISM) band. At each carrier frequency, we report sensitivity, minimum detectable field, and detectable electric-field dynamic range. We also present a routine for optimizing off-resonant signal detection by tuning experimental parameters such as Rydberg coupler laser detuning and RF local oscillator strength. This Python-based optimization routine, which can be used at any off-resonant carrier frequency, is shared on Github for others to use in their own investigations.
Versions
Related
- Sensitivity Enhancement of S-Band Rydberg Atom Microwave Receiver Enabled by Resonant Cavity Field Confinement
- Resonant pair production and flat band melting in a driven Rydberg chain
- Spectral fingerprint recognition of mobile signals via Rydberg atomic sensors
- Phase-Sensitive Heterodyne Detection of MW using EIT Harmonics in Rydberg Atoms
- Characteristics of VHF and UHF band detection using Stark shifting in Rydberg-atom sensors
BibTeX
@misc{viray2026profiling,
title = {{Profiling a Rydberg-Atom Electric Field Sensor for Off-Resonant Detection of Sub-100 MHz RF Signals}},
author = {Michael A. Viray and Abby Halasi-Kun and Baran N. Kayim and Brian C. Sawyer and Robert Wyllie and David S. La Mantia},
howpublished = {arXiv},
year = {2026},
month = jun,
doi = {10.48550/arxiv.2606.10151},
eprint = {2606.10151},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2606.10151},
note = {CC BY 4.0},
}
RIS
TY - UNPB
TI - Profiling a Rydberg-Atom Electric Field Sensor for Off-Resonant Detection of Sub-100 MHz RF Signals
AU - Michael A. Viray
AU - Abby Halasi-Kun
AU - Baran N. Kayim
AU - Brian C. Sawyer
AU - Robert Wyllie
AU - David S. La Mantia
PY - 2026
DA - 2026/06/08
PB - arXiv
DO - 10.48550/arxiv.2606.10151
UR - https://arxiv.org/abs/2606.10151
AB - We present a Rydberg-Atom electric field sensor optimized to detect signals at sub-100 MHz carrier frequencies. The sensing setup employs a sapphire vapor cell that allows for detection of signals below 100~MHz -- typical vapor cells made of glass or quartz demonstrate strong screening of radio frequency (RF) signals in this frequency regime. Applied signals are detected by observing AC Stark shifts in the atomic vapor energy levels. As a test case for the commercial utility of this receiver, we perform our tests at several carrier frequencies in the Industrial, Scientific, and Medical (ISM) band. At each carrier frequency, we report sensitivity, minimum detectable field, and detectable electric-field dynamic range. We also present a routine for optimizing off-resonant signal detection by tuning experimental parameters such as Rydberg coupler laser detuning and RF local oscillator strength. This Python-based optimization routine, which can be used at any off-resonant carrier frequency, is shared on Github for others to use in their own investigations.
ER -