Graded Orbital Interface Engineering for Enhanced Damping-like Torque Efficiency
Abstract
Orbitronics has emerged as a promising approach for generating orbital currents using low cost, abundant materials through the orbital Hall effect. Since orbital current cannot directly interact with the local magnetization of a conventional ferromagnet, a non-magnetic layer with strong spin orbit coupling is required for converting orbital current into spin current. However, the propagation of orbital current across the interface between an orbital source and an orbital to spin converter remains poorly understood. Here, we tuned the Ru/Pt orbital interface from an abrupt interface to a graded interface by introducing a controlled RuPt intermixed layer and quantified the resulting damping like torque efficiencies. A small, intermixed thickness of 0.26 nm enhances the damping like torque efficiency by 15% compared with the abrupt Ru/Pt interface and by 70% compared with the Pt reference. Further increasing the intermixing thickness progressively suppresses the torque efficiency. We attribute this nonmonotonic behavior to the competition between enhanced orbital transmission through a gradual crystal field transition and orbital current dephasing due to alloy disorder and scattering. Our results demonstrate that the orbital-source/converter interface is an active element for controlling orbital transport and provides an experimentally accessible approach for optimizing orbital current transmission and torque generation in orbitronic heterostructures.
Related
- Interface-Controlled Defect Engineering in TiN/TaN Superlattices for Enhanced Hardness and Fracture Toughness
- A direct-coupling MOEMS optical switch with muA direct-coupling MOEMS optical switch with multilayer AR coating for enhanced transmission efficiencyltilayer AR coating for enhanced transmission efficiency
- Interface-tailored Fe3O4+x@C composites with controlled band alignment for enhanced photocatalytic performance
- High-fidelity flopping-mode single-spin operation via triple-dot orbital-band engineering
- Electrostatic Stabilization of Near-Surface Quantum Sensors via Dielectric Interface Engineering
BibTeX
@misc{das2026graded,
title = {{Graded Orbital Interface Engineering for Enhanced Damping-like Torque Efficiency}},
author = {Subhakanta Das and Bilal Jamshed and Kesavan Jawahar and S. N. Piramanayagam},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.08551},
eprint = {2610.08551},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.08551},
note = {CC BY 4.0},
}
RIS
TY - UNPB
TI - Graded Orbital Interface Engineering for Enhanced Damping-like Torque Efficiency
AU - Subhakanta Das
AU - Bilal Jamshed
AU - Kesavan Jawahar
AU - S. N. Piramanayagam
PY - 2026
DA - 2026/10/06
PB - arXiv
DO - 10.48550/arxiv.2610.08551
UR - https://arxiv.org/abs/2610.08551
AB - Orbitronics has emerged as a promising approach for generating orbital currents using low cost, abundant materials through the orbital Hall effect. Since orbital current cannot directly interact with the local magnetization of a conventional ferromagnet, a non-magnetic layer with strong spin orbit coupling is required for converting orbital current into spin current. However, the propagation of orbital current across the interface between an orbital source and an orbital to spin converter remains poorly understood. Here, we tuned the Ru/Pt orbital interface from an abrupt interface to a graded interface by introducing a controlled RuPt intermixed layer and quantified the resulting damping like torque efficiencies. A small, intermixed thickness of 0.26 nm enhances the damping like torque efficiency by 15% compared with the abrupt Ru/Pt interface and by 70% compared with the Pt reference. Further increasing the intermixing thickness progressively suppresses the torque efficiency. We attribute this nonmonotonic behavior to the competition between enhanced orbital transmission through a gradual crystal field transition and orbital current dephasing due to alloy disorder and scattering. Our results demonstrate that the orbital-source/converter interface is an active element for controlling orbital transport and provides an experimentally accessible approach for optimizing orbital current transmission and torque generation in orbitronic heterostructures.
ER -