Adsorption of Malachite Green Dye from Aqueous Solution Using Iron-Modified Biochar Synthesized from Municipal Sewage Sludge
- 1Jimma University , , ,
Abstract
This study investigated the adsorption of Malachite Green (MG), a toxic cationic dye, from aqueous solution using iron-modified biochar derived from municipal sewage sludge (Fe-MSS). Biochars were prepared from various industrial wastes (brewery spent grain (BSG), brewery sewage sludge (BSS), municipal sewage sludge (MSS), and metal-processing slag (MPS)). Preliminary studies showed that iron modification of MSS (Fe-MSS) significantly increased MG removal efficiency from 76.0% to 90.0%. Optimal Fe-MSS biochar preparation, achieved at a pyrolysis temperature of 500 °C for 3 h and a 2:1 Fe3+/Fe2+molar ratio, resulted in 97.6% MG removal. The prepared adsorbents were characterized using BET, FTIR, XRD, and SEM. Iron modification increased the surface area of MSS from 21.25 to 46.77 m2/g and roughly doubled the total pore volume. In contrast, the average pore size decreased from 8.11 to 6.46 nm. This increased surface area and mesoporous structure provide more active sites and improve MG diffusion, thereby enhancing the adsorption efficiency of Fe-MSS. Optimal MG removal was achieved at pH 10, with a 2 g/L adsorbent dose and a 3 h contact time. The adsorption process followed pseudo-second-order kinetic and the Langmuir isotherm models with a maximum capacity of 34.29 mg/g. The adsorbent demonstrated good selectivity in the presence of competing cations and maintained reasonable reusability over five cycles. The results highlight Fe-MSS biochar as an effective, low-cost adsorbent for MG removal, offering a sustainable approach for wastewater treatment and the valorization of sewage sludge.
Related
- Adsorption of crystal violet and malachite green onto dibarium magnesium orthoborate (Ba₂Mg(BO₃)₂): equilibrium, kinetics and thermodynamics.
- Efficient removal of fusidic acid from aqueous solution using synthesized zinc magnesium aluminum layered double hydroxide adsorbent
- Green synthesized licorice-root-based SiNH2@FeNP nanocomposite for efficient removal of priority pollutant atrazine: response surface methodology and adsorption dynamics
- Thallium isotopic fractionation during adsorption onto natural manganese oxides: a comparison with synthesized analogs
- Selective adsorption and reduction of Pd(II) in wastewater by Fe3O4@SiO2 core-shell nanoparticles modified with ionic liquid
BibTeX
@article{amare2026adsorption,
title = {{Adsorption of Malachite Green Dye from Aqueous Solution Using Iron-Modified Biochar Synthesized from Municipal Sewage Sludge}},
author = {Asmamaw Amare and Alemayehu Yifru and Tsegaye Girma Asere},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c03481},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c03481/5457860/Adsorption-of-Malachite-Green-Dye-from-Aqueous},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Adsorption of Malachite Green Dye from Aqueous Solution Using Iron-Modified Biochar Synthesized from Municipal Sewage Sludge
AU - Asmamaw Amare
AU - Alemayehu Yifru
AU - Tsegaye Girma Asere
PY - 2026
DA - 2026/10/25
JO - ACS Omega
DO - 10.1021/acsomega.6c03481
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c03481/5457860/Adsorption-of-Malachite-Green-Dye-from-Aqueous
AB - This study investigated the adsorption of Malachite Green (MG), a toxic cationic dye, from aqueous solution using iron-modified biochar derived from municipal sewage sludge (Fe-MSS). Biochars were prepared from various industrial wastes (brewery spent grain (BSG), brewery sewage sludge (BSS), municipal sewage sludge (MSS), and metal-processing slag (MPS)). Preliminary studies showed that iron modification of MSS (Fe-MSS) significantly increased MG removal efficiency from 76.0% to 90.0%. Optimal Fe-MSS biochar preparation, achieved at a pyrolysis temperature of 500 °C for 3 h and a 2:1 Fe3+/Fe2+molar ratio, resulted in 97.6% MG removal. The prepared adsorbents were characterized using BET, FTIR, XRD, and SEM. Iron modification increased the surface area of MSS from 21.25 to 46.77 m2/g and roughly doubled the total pore volume. In contrast, the average pore size decreased from 8.11 to 6.46 nm. This increased surface area and mesoporous structure provide more active sites and improve MG diffusion, thereby enhancing the adsorption efficiency of Fe-MSS. Optimal MG removal was achieved at pH 10, with a 2 g/L adsorbent dose and a 3 h contact time. The adsorption process followed pseudo-second-order kinetic and the Langmuir isotherm models with a maximum capacity of 34.29 mg/g. The adsorbent demonstrated good selectivity in the presence of competing cations and maintained reasonable reusability over five cycles. The results highlight Fe-MSS biochar as an effective, low-cost adsorbent for MG removal, offering a sustainable approach for wastewater treatment and the valorization of sewage sludge.
SN - 2470-1343
ER -