Finite Element Simulation of Microwave Technologies for PowderBased Volumetric Additive Manufacturing Processes
Abstract
Volumetric additive manufacturing (VAM) is a promising field of advanced manufacturing which reduces production times of conventional 3D printing while retaining application to complex geometries. Current VAM systems are limited to photo-polymerizing resins, which reduces the general applicability across industry. This work presents exploratory finite element simulations of microwave-based VAM systems compatible with ceramic, metal, or composite powder feedstock. The simulations explore three devices -- a linear resonator, a cross interferometer, and a boundary heater -- each with potential uses in manufacturing processes for one or multiple of the considered feedstock materials. We find that with precise control of input frequency, power, and waveguide transverse modes, thermal lattices can be engineered to selectively heat regions of the feedstock, allowing direct application to VAM. Resultant lattices have cellular dimensions on the order of 1 mm, and require input powers on the order of 100 kW. With advances in microwave technologies allowing for this precision, such devices could open pathways to VAM with materials currently outside the scope of optical methods.
Related
- Dielectric characterisation of human adrenal glands and adrenal tumours for the development of microwave ablation technologies for hypertension treatment
- A discontinuous Petrov-Galerkin finite-element framework for the simulation of microwave-heated flows
- HybridMC: a fast detailed simulation framework for optical calorimeter technologies at the LHCb ECAL Upgrade II
- Beyond the Thin-Layer Limit: Differentiable Volumetric Training for Visible-Range Diffractive Neural Networks
- Towards assessing soft tissue volumetric change from compression testing under MRI : experimental developments and preliminary results
BibTeX
@misc{mackey2026finite,
title = {{Finite Element Simulation of Microwave Technologies for PowderBased Volumetric Additive Manufacturing Processes}},
author = {Brendan Mackey and Levi Smith and Bosco Yu},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.00842},
eprint = {2610.00842},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.00842},
note = {CC BY 4.0},
}
RIS
TY - UNPB
TI - Finite Element Simulation of Microwave Technologies for PowderBased Volumetric Additive Manufacturing Processes
AU - Brendan Mackey
AU - Levi Smith
AU - Bosco Yu
PY - 2026
DA - 2026/10/07
PB - arXiv
DO - 10.48550/arxiv.2610.00842
UR - https://arxiv.org/abs/2610.00842
AB - Volumetric additive manufacturing (VAM) is a promising field of advanced manufacturing which reduces production times of conventional 3D printing while retaining application to complex geometries. Current VAM systems are limited to photo-polymerizing resins, which reduces the general applicability across industry. This work presents exploratory finite element simulations of microwave-based VAM systems compatible with ceramic, metal, or composite powder feedstock. The simulations explore three devices -- a linear resonator, a cross interferometer, and a boundary heater -- each with potential uses in manufacturing processes for one or multiple of the considered feedstock materials. We find that with precise control of input frequency, power, and waveguide transverse modes, thermal lattices can be engineered to selectively heat regions of the feedstock, allowing direct application to VAM. Resultant lattices have cellular dimensions on the order of 1 mm, and require input powers on the order of 100 kW. With advances in microwave technologies allowing for this precision, such devices could open pathways to VAM with materials currently outside the scope of optical methods.
ER -