Skip to content
DraconiticResearch
Search Sources API
203,952 studies31 sourcesUpdated 33 min ago
Peer-reviewedCC BY-NC-ND 4.0Scientific Reports

Effect of wall thickness and openings on the flexural properties of PLA produced by additive manufacturing

  • Memduh Karalar
  • Mustafa Okan Türe
  • Ali Motameni
  • Fuat Korkut
  • Zafer Evis
Open at sourcePDFDOICite

Related

  1. evaluating local viscoelastic properties of artery-mimicking phantoms using high-resolution flexural wavenumber analysis
    Max Gattin, Julien de Rosny
    arXivPreprintarXiv licenceFull textBiological & medical physicsCondensed matterarXiv
  2. Effect of Scrap Configuration on the Tensile and Flexural Properties of Grinding-Free Recycled CF/PA6 Composites
    Talita Melo do Nascimento, Larissa Stieven Montagna, Thiely Ferreira da Silva +6
    ACS OmegaPeer-reviewedCC BY 4.0Full textGeneral chemistryCrossrefEurope PMCEurope PMCPMC
  3. Additive Manufacturing of Bioresorbable Tracheal Stents from PDO/PCL Blends: Effects of Composition and Processing on Structure and Properties
    Carmen Sánchez González, Mauro Malvè, Cristina Díaz Jiménez
    Materials (Basel, Switzerland)Peer-reviewedCC BYFull textEurope PMC
  4. Influence of Post-Processing by Annealing on Additive Manufacturing Productivity and Mechanical Properties in Three-Point Bending of Additively Manufactured Specimens from PETG and Recycled PETG
    Dragos Gabriel Zisopol, Mihail Minescu, Dragos Valentin Iacob +1
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  5. Effect of Micro-Structure and Mechanical Properties on 309L Austenitic Stainless Steel Deposition by Cold Metal Transfer Wire-Arc Additive Manufacturing
    Guosheng Fei, Zuofa Liu, Zhongli Li +4
    Materials (Basel, Switzerland)Peer-reviewedCC BYFull textEurope PMC

Cite

BibTeXRIS
BibTeX
@article{karalar2026effect,
  title = {{Effect of wall thickness and openings on the flexural properties of PLA produced by additive manufacturing}},
  author = {Memduh Karalar and Mustafa Okan Türe and Ali Motameni and Fuat Korkut and Zafer Evis},
  journal = {Scientific Reports},
  year = {2026},
  month = oct,
  doi = {10.1038/s41598-026-67674-9},
  url = {https://www.nature.com/articles/s41598-026-67674-9},
  note = {CC BY-NC-ND 4.0},
}
RIS
TY  - JOUR
TI  - Effect of wall thickness and openings on the flexural properties of PLA produced by additive manufacturing
AU  - Memduh Karalar
AU  - Mustafa Okan Türe
AU  - Ali Motameni
AU  - Fuat Korkut
AU  - Zafer Evis
PY  - 2026
DA  - 2026/10/21
JO  - Scientific Reports
DO  - 10.1038/s41598-026-67674-9
UR  - https://www.nature.com/articles/s41598-026-67674-9
SN  - 2045-2322
ER  -