Contrast-enhanced micro-computed tomography visualization of adhesively bonded CFRP/aluminum tubular joints
- 1Department of Chemistry, Ghent University 9000 Ghent Belgium
- 2Research Group of Computed Tomography, University of Applied Sciences Upper Austria 4600 Wels Austria
- 3Center for X-ray Tomography, Department of Physics and Astronomy, Ghent University 9000 Ghent Belgium
Abstract
Multi-material adhesively bonded joints between carbon fiber reinforced polymers (CFRPs) and metals are used in many high-end applications in automotive and aerospace industries, with adhesives having multiple benefits over mechanical fasteners. However, automated quality control of the adhesive layer using suitable nondestructive testing techniques is lacking and hampers their use to the fullest extent. Micro-computed tomography (micro-CT) is an established technique in visualizing these materials, but requires contrast between the CFRP and carbon-based adhesive to enable automatic component differentiation and high-quality imaging. In this work, we introduce hafnium oxide nanocrystals (HfO2 NCs) as a contrast agent in the adhesive to visualize multi-material tubular joints. We present an optimized and scalable dispersion workflow that, in combination with careful surface chemistry design, results in long term stable NC dispersions. Micro-CT imaging of the CFRP/Al adhesively bonded tubular joints shows the increased contrast compared to an unloaded adhesive, which can be quantified based on their local attenuation coefficients. The increase in contrast leads to distinguishable peaks in the gray value histogram, allowing for fully automated multi-material segmentation.
Related
- Full-field fluorescence computed tomography (F3CT) using a calibrated virtual cone-beam pinhole geometry
- Neural-network-based material identification in photon-counting computed tomography using region-of-interest spectral features
- Computed Tomography Reconstruction Algorithm Using Markov Random Field Model
- Towards 3D fully randomized frequency-domain reconstruction of the speed of sound in breast ultrasound computed tomography
- Signal recovery in the polychromatic computed tomography model: Injectivity and complexity
BibTeX
@article{vos2026contrastenhanced,
title = {{Contrast-enhanced micro-computed tomography visualization of adhesively bonded CFRP/aluminum tubular joints}},
author = {John De Vos and Sascha Senck and Iván Josipovic and Matthieu N. Boone and Klaartje De Buysser},
journal = {Nanoscale Advances},
year = {2026},
month = sep,
doi = {10.1039/d6na00506c},
url = {https://doi.org/10.1039/d6na00506c},
note = {CC BY-NC 3.0},
}
RIS
TY - JOUR
TI - Contrast-enhanced micro-computed tomography visualization of adhesively bonded CFRP/aluminum tubular joints
AU - John De Vos
AU - Sascha Senck
AU - Iván Josipovic
AU - Matthieu N. Boone
AU - Klaartje De Buysser
PY - 2026
DA - 2026/09/08
JO - Nanoscale Advances
DO - 10.1039/d6na00506c
UR - https://doi.org/10.1039/d6na00506c
AB - Multi-material adhesively bonded joints between carbon fiber reinforced polymers (CFRPs) and metals are used in many high-end applications in automotive and aerospace industries, with adhesives having multiple benefits over mechanical fasteners. However, automated quality control of the adhesive layer using suitable nondestructive testing techniques is lacking and hampers their use to the fullest extent. Micro-computed tomography (micro-CT) is an established technique in visualizing these materials, but requires contrast between the CFRP and carbon-based adhesive to enable automatic component differentiation and high-quality imaging. In this work, we introduce hafnium oxide nanocrystals (HfO2 NCs) as a contrast agent in the adhesive to visualize multi-material tubular joints. We present an optimized and scalable dispersion workflow that, in combination with careful surface chemistry design, results in long term stable NC dispersions. Micro-CT imaging of the CFRP/Al adhesively bonded tubular joints shows the increased contrast compared to an unloaded adhesive, which can be quantified based on their local attenuation coefficients. The increase in contrast leads to distinguishable peaks in the gray value histogram, allowing for fully automated multi-material segmentation.
SN - 2516-0230
ER -