Skip to content
DraconiticResearch
Search Sources API
203,234 studies31 sourcesUpdated 13 min ago
Peer-reviewedCC BY 4.0Catalysts

Nd3+-Induced Modulation of the Structural, Morphological, Magnetic, Optical, and Photocatalytic Activity of Mg–Co–Zn Ferrite Nanoparticles

  1. 1General Studies Department, Jubail Industrial College, Jubail Industrial City, 31961 Saudi Arabia

Abstract

Developing highly efficient, magnetically recoverable photocatalysts for sustainable wastewater treatment remains a major challenge in environmental remediation. In this work, Nd3+-substituted Mg0.5Co0.2Zn0.3NdxFe2−xO4 (x = 0.00–0.08) spinel nanoferrites were synthesized via the sol–gel citrate combustion method to investigate the influence of rare-earth incorporation on their structural, magnetic, optical, and photocatalytic properties. X-ray diffraction confirmed a single-phase cubic spinel structure with no detectable secondary phases, while Williamson–Hall analysis revealed crystallite sizes ranging from 30.74 to 36.78 nm depending on Nd3+ concentration. Vibrating sample magnetometry demonstrated composition-dependent soft magnetic behavior, with the x = 0.06 composition exhibiting the lowest coercivity (92.43 Oe), attractive for low-loss high-frequency applications, while the saturation magnetization decreased from 54.65 to 42.63 emu/g with increasing Nd3+ content, remaining sufficiently high for facile magnetic separation and reuse of the catalyst. Optical characterization revealed a non-monotonic variation in the optical band gap with Nd3+ content (1.68–1.87 eV), with the lowest value (1.68 eV) for x = 0.08, which is attributed to Nd3+-induced lattice distortion and defect states. These electronic structure modifications markedly improved the photocatalytic activity toward methylene blue (MB) decolorization, with the Mg0.5Co0.2Zn0.3Nd0.08Fe1.92O4 nanoferrite achieving 98.40% decolorization within 60 min under visible-light irradiation. Radical-scavenging experiments identified photogenerated holes (h+) and superoxide radicals ( ) as the dominant reactive species governing the decolorization process, while recycling tests demonstrated excellent stability, retaining 96.43% of its initial activity after five consecutive cycles. The outstanding photocatalytic efficiency, excellent recyclability, low coercivity, and intrinsic magnetic recoverability demonstrate that Nd3+-engineered Mg–Co–Zn nanoferrites are promising multifunctional nanostructured materials for visible-light-driven photocatalysis and magnetically assisted environmental remediation. Their tunable structural, optical, magnetic, and surface properties highlight the potential of rare-earth-engineered ferrite nanomaterials as versatile platforms for sustainable catalytic technologies and emerging energy-related applications.

Related

  1. Multifunctional structural, optical, magnetic and electrochemical properties of Co-ZnO nanoparticles for supercapacitor applications
    Almoneef Maha M., Awad Manal A., Aldosari Haia H. +4
    Nanotechnology ReviewsPeer-reviewedCC BYFull textMaterials & polymersDOAJ
  2. Doping effect of Ho on the structural, optical, ac electrical transport and magnetic properties of Mg–Zn ferrites nanoparticles
    Muhammad Samir Ullah, Kaniz Fatema Laizo
    RSC advancesPeer-reviewedCC BYFull textMaterials & polymersEurope PMCPMC
  3. Bio-inspired decoration of Ag nanoparticles on eggshell-derived hierarchical CaO-based flower-like architectures for enhanced antibacterial, photocatalytic, and hemocompatible applications
    Büşra Şensoy Gün, Belgin Tunalı, Cemile Şevkan
    Scientific ReportsPeer-reviewedCC BY-NC-ND 4.0Full textMaterials & polymersCrossref
  4. Morphological, genetic, and phenolic characterization of Baccharis glutinosa and Baccharis salicifolia and their application in the biogenic synthesis of silver nanoparticles
    Zulita Prieto, Linda Sánchez-Tuesta, Monica Arqueros +2
    Scientific ReportsPeer-reviewedCC BY-NC-ND 4.0Full textMaterials & polymersCrossref
  5. Surface-Engineered 3D-Printed Polymeric Flat-Panel Photoreactors with P25 TiO2 Nanoparticles for Photocatalytic Hydrogen Evolution
    María José Torres, Jesús Román, María del Prado Garrido +1
    NanomaterialsPeer-reviewedCC BY 4.0Materials & polymersCrossref
BibTeX
@article{albassami2026nd3induced,
  title = {{Nd3+-Induced Modulation of the Structural, Morphological, Magnetic, Optical, and Photocatalytic Activity of Mg–Co–Zn Ferrite Nanoparticles}},
  author = {N. S. Al-Bassami},
  journal = {Catalysts},
  year = {2026},
  month = oct,
  doi = {10.3390/catal16110976},
  url = {https://www.mdpi.com/2073-4344/16/11/976},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Nd3+-Induced Modulation of the Structural, Morphological, Magnetic, Optical, and Photocatalytic Activity of Mg–Co–Zn Ferrite Nanoparticles
AU  - N. S. Al-Bassami
PY  - 2026
DA  - 2026/10/31
JO  - Catalysts
DO  - 10.3390/catal16110976
UR  - https://www.mdpi.com/2073-4344/16/11/976
AB  - Developing highly efficient, magnetically recoverable photocatalysts for sustainable wastewater treatment remains a major challenge in environmental remediation. In this work, Nd3+-substituted Mg0.5Co0.2Zn0.3NdxFe2−xO4 (x = 0.00–0.08) spinel nanoferrites were synthesized via the sol–gel citrate combustion method to investigate the influence of rare-earth incorporation on their structural, magnetic, optical, and photocatalytic properties. X-ray diffraction confirmed a single-phase cubic spinel structure with no detectable secondary phases, while Williamson–Hall analysis revealed crystallite sizes ranging from 30.74 to 36.78 nm depending on Nd3+ concentration. Vibrating sample magnetometry demonstrated composition-dependent soft magnetic behavior, with the x = 0.06 composition exhibiting the lowest coercivity (92.43 Oe), attractive for low-loss high-frequency applications, while the saturation magnetization decreased from 54.65 to 42.63 emu/g with increasing Nd3+ content, remaining sufficiently high for facile magnetic separation and reuse of the catalyst. Optical characterization revealed a non-monotonic variation in the optical band gap with Nd3+ content (1.68–1.87 eV), with the lowest value (1.68 eV) for x = 0.08, which is attributed to Nd3+-induced lattice distortion and defect states. These electronic structure modifications markedly improved the photocatalytic activity toward methylene blue (MB) decolorization, with the Mg0.5Co0.2Zn0.3Nd0.08Fe1.92O4 nanoferrite achieving 98.40% decolorization within 60 min under visible-light irradiation. Radical-scavenging experiments identified photogenerated holes (h+) and superoxide radicals ( ) as the dominant reactive species governing the decolorization process, while recycling tests demonstrated excellent stability, retaining 96.43% of its initial activity after five consecutive cycles. The outstanding photocatalytic efficiency, excellent recyclability, low coercivity, and intrinsic magnetic recoverability demonstrate that Nd3+-engineered Mg–Co–Zn nanoferrites are promising multifunctional nanostructured materials for visible-light-driven photocatalysis and magnetically assisted environmental remediation. Their tunable structural, optical, magnetic, and surface properties highlight the potential of rare-earth-engineered ferrite nanomaterials as versatile platforms for sustainable catalytic technologies and emerging energy-related applications.
SN  - 2073-4344
ER  -