Investigation of the Effect of O2/Ar Ratio on Flexible WO3 Electrochromic Films Prepared by Magnetron Sputtering and Performance Optimization via Ti Doping
- 1Zhengzhou University , , ,
Abstract
In this study, WO3 thin films were prepared on PET/ITO flexible substrates via magnetron sputtering, and the effects of the O2/Ar ratio on the microstructure and electrochromic performance were systematically investigated. Furthermore, Ti doping was introduced under optimal conditions to further enhance the performance. The results indicate that the O2/Ar ratio significantly influences ion transport and charge storage behavior by regulating the short-range order, surface morphology, and oxygen vacancy concentration of the films. When the O2/Ar ratio is 20:80, an optimal balance between structural ordering and defect concentration is achieved, leading to the best electrochromic performance, with an average optical modulation of 61.44% in the visible range. On this basis, Ti doping further optimizes the electronic structure and defect distribution of the films. Under optimal conditions, dual-band electrochromic modulation in both the visible and near-infrared regions is achieved (71.53%/53.41%), while simultaneously reducing interfacial charge transfer resistance and enhancing ion insertion capability. Moreover, the Ti-doped film retains 91.12% of its initial optical modulation after 1000 coloration/bleaching cycles, demonstrating excellent cycling durability. This study reveals the regulatory mechanism of the O2/Ar ratio on the structure and electrochromic performance of flexible WO3 thin films, elucidates the role of Ti doping in performance enhancement, and demonstrates a competitive combination of optical modulation, electrochemical kinetics, and cycling stability among recently reported flexible WO3-based electrochromic films, providing a theoretical basis for the design of high-performance flexible electrochromic films.
Related
- Optical Emission Spectroscopy Applied to Plasma Magnetron Sputtering Metallic Deposition Onto Liquid at Low Pressure
- Low-Temperature Growth of Epitaxial Li3xLa(2/3-x)TiO3 Thin Films by RF Magnetron Sputtering
- Magnetron Sputtering of Conformal Tungsten and Copper Coatings onto Glass Microsphere Powder via Agitation
- Optimization of RF Sputtering Power for High-Performance ITZO Thin-Film Transistors: Correlation Between Film Properties, Oxygen Defects and Electrical Performance
- Achieving Up To 10 µm epitaxial AlN films on none heated composite substrates using DC magnetron sputtering
BibTeX
@article{chen2026investigation,
title = {{Investigation of the Effect of O2/Ar Ratio on Flexible WO3 Electrochromic Films Prepared by Magnetron Sputtering and Performance Optimization via Ti Doping}},
author = {Yunlong Chen and Wenbo Guo and Dan Li and Lan Zhang and Huizhong Ma},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c06128},
url = {https://pubs.acs.org/acsodf/article/11/41/63122/5448541/Investigation-of-the-Effect-of-O2-Ar-Ratio-on},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Investigation of the Effect of O2/Ar Ratio on Flexible WO3 Electrochromic Films Prepared by Magnetron Sputtering and Performance Optimization via Ti Doping
AU - Yunlong Chen
AU - Wenbo Guo
AU - Dan Li
AU - Lan Zhang
AU - Huizhong Ma
PY - 2026
DA - 2026/10/10
JO - ACS Omega
DO - 10.1021/acsomega.6c06128
UR - https://pubs.acs.org/acsodf/article/11/41/63122/5448541/Investigation-of-the-Effect-of-O2-Ar-Ratio-on
AB - In this study, WO3 thin films were prepared on PET/ITO flexible substrates via magnetron sputtering, and the effects of the O2/Ar ratio on the microstructure and electrochromic performance were systematically investigated. Furthermore, Ti doping was introduced under optimal conditions to further enhance the performance. The results indicate that the O2/Ar ratio significantly influences ion transport and charge storage behavior by regulating the short-range order, surface morphology, and oxygen vacancy concentration of the films. When the O2/Ar ratio is 20:80, an optimal balance between structural ordering and defect concentration is achieved, leading to the best electrochromic performance, with an average optical modulation of 61.44% in the visible range. On this basis, Ti doping further optimizes the electronic structure and defect distribution of the films. Under optimal conditions, dual-band electrochromic modulation in both the visible and near-infrared regions is achieved (71.53%/53.41%), while simultaneously reducing interfacial charge transfer resistance and enhancing ion insertion capability. Moreover, the Ti-doped film retains 91.12% of its initial optical modulation after 1000 coloration/bleaching cycles, demonstrating excellent cycling durability. This study reveals the regulatory mechanism of the O2/Ar ratio on the structure and electrochromic performance of flexible WO3 thin films, elucidates the role of Ti doping in performance enhancement, and demonstrates a competitive combination of optical modulation, electrochemical kinetics, and cycling stability among recently reported flexible WO3-based electrochromic films, providing a theoretical basis for the design of high-performance flexible electrochromic films.
SN - 2470-1343
ER -