Comparison of PANI- and PEDOT:PSS-Incorporated GelMA Hydrogels for Neuronal Differentiation of SH-SY5Y Cells.
- 1School of Chemical, Biological and Battery Engineering, Gachon University, 1342 Seongnam-daero, Seongnam-si 13120, Gyeonggi-do, Republic of Korea.
Abstract
Conductive hydrogels are widely pursued for neural tissue engineering, but the conventional route of polymerizing conductive monomers in situ requires toxic monomers or organic solvents and is incompatible with cell encapsulation. Here, conductive hydrogels were prepared in a single step by dispersing pre-polymerized polyaniline (PANI) particles or poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) nanoparticles into a gelatin methacryloyl (GelMA) precursor and photocrosslinking, giving a simpler, cell-friendly route from an injectable precursor; the two polymers were compared directly within a single platform. PEDOT:PSS was uniformly integrated, whereas PANI progressively aggregated, and these differences in dispersibility were reflected in the microstructure, mechanical properties, and swelling behavior of the hydrogels. Both polymers increased the electrical conductance of the hydrogels; the increase was statistically significant for PANI but small in magnitude, and the cellular outcomes diverged in the opposite direction. Over 7 days, the PEDOT:PSS 0.2% group supported SH-SY5Y metabolic activity comparable to GelMA, whereas PANI reduced it. After neuronal induction, neurite outgrowth appeared most extensive in the PEDOT:PSS 0.2% hydrogels, with co-detection of βIII-tubulin, MAP2, and synaptophysin. Cells could also be encapsulated within the precursor and photocrosslinked in situ, remaining viable in all groups, demonstrating that the one-step route is compatible with three-dimensional cell-laden constructs. Because the conductance differences were small and ran opposite to the biological outcome, these findings indicate that the performance of GelMA-based conductive hydrogels is associated with polymer dispersibility, surface chemistry, and mechanical properties rather than with bulk conductance, and point to dispersion stability rather than intrinsic conductivity as the primary design variable at cell-compatible loadings, with GelMA/PEDOT:PSS as a candidate platform for neural tissue engineering.
Related
- Optimization of Hydrophobic Group Structures Covalently Incorporated into Gelatin Hydrogels for Efficient Adsorption and Release of Hydrophobic Drugs.
- A comparison of clinical phenotype and outcomes in anti- melanoma differentiation-associated protein 5 dermatomyositis and anti-synthetase syndrome in a multiethnic cohort in Singapore
- When Mammary-Like Anogenital Glands Go Rogue: Vulvar Phyllodes Tumor With Incorporated Hidradenoma Papilliferum.
- A steerable microcatheter-stabilizer strategy for stent-assisted coiling of a wide-neck middle cerebral artery aneurysm with an acutely angulated incorporated branch.
- RNA with Azvudine incorporated one nucleotide upstream of 3’-end resists cleavage by SARS-CoV-2 proofreading exonuclease
BibTeX
@article{pyo2026comparison,
title = {{Comparison of PANI- and PEDOT:PSS-Incorporated GelMA Hydrogels for Neuronal Differentiation of SH-SY5Y Cells.}},
author = {Gayeon Pyo and Ha Som Yu and Yeontae Kang and Hansol Lee and Hyun Jong Lee},
journal = {Gels (Basel, Switzerland)},
year = {2026},
month = oct,
doi = {10.3390/gels12100892},
url = {https://europepmc.org/article/MED/42929927},
note = {CC BY},
}
RIS
TY - JOUR
TI - Comparison of PANI- and PEDOT:PSS-Incorporated GelMA Hydrogels for Neuronal Differentiation of SH-SY5Y Cells.
AU - Gayeon Pyo
AU - Ha Som Yu
AU - Yeontae Kang
AU - Hansol Lee
AU - Hyun Jong Lee
PY - 2026
DA - 2026/10/02
JO - Gels (Basel, Switzerland)
DO - 10.3390/gels12100892
UR - https://europepmc.org/article/MED/42929927
AB - Conductive hydrogels are widely pursued for neural tissue engineering, but the conventional route of polymerizing conductive monomers in situ requires toxic monomers or organic solvents and is incompatible with cell encapsulation. Here, conductive hydrogels were prepared in a single step by dispersing pre-polymerized polyaniline (PANI) particles or poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) nanoparticles into a gelatin methacryloyl (GelMA) precursor and photocrosslinking, giving a simpler, cell-friendly route from an injectable precursor; the two polymers were compared directly within a single platform. PEDOT:PSS was uniformly integrated, whereas PANI progressively aggregated, and these differences in dispersibility were reflected in the microstructure, mechanical properties, and swelling behavior of the hydrogels. Both polymers increased the electrical conductance of the hydrogels; the increase was statistically significant for PANI but small in magnitude, and the cellular outcomes diverged in the opposite direction. Over 7 days, the PEDOT:PSS 0.2% group supported SH-SY5Y metabolic activity comparable to GelMA, whereas PANI reduced it. After neuronal induction, neurite outgrowth appeared most extensive in the PEDOT:PSS 0.2% hydrogels, with co-detection of βIII-tubulin, MAP2, and synaptophysin. Cells could also be encapsulated within the precursor and photocrosslinked in situ, remaining viable in all groups, demonstrating that the one-step route is compatible with three-dimensional cell-laden constructs. Because the conductance differences were small and ran opposite to the biological outcome, these findings indicate that the performance of GelMA-based conductive hydrogels is associated with polymer dispersibility, surface chemistry, and mechanical properties rather than with bulk conductance, and point to dispersion stability rather than intrinsic conductivity as the primary design variable at cell-compatible loadings, with GelMA/PEDOT:PSS as a candidate platform for neural tissue engineering.
SN - 2310-2861
ER -