Skip to content
DraconiticResearch
Search Sources API
179,152 studies31 sourcesUpdated 23 min ago
Peer-reviewedCC BY 4.0Chemical Engineering Journal

Bio-based cellulose-filled vitrimers for 3D printing via liquid deposition modeling: Rheological tuning and environmental assessment

  • Edoardo Albertini
  • Mirko Busto
  • Sara Dalle Vacche
  • Gian Andrea Blengini
  • Marc Guerre
  • Alessandra Vitale
Open at sourcePDFDOICite

Related

  1. Rheological and Morphological Characterization of Asphalt Cement Hybrid-Modified with Waste-Derived Cellulose Fibers and Crumb Rubber
    Hümeyra Bolakar Tosun, Fatma Pınar Göksal
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  2. Physical Aging, Composition, and Carbon-Additive Identity as Separable Rheological Controls in Colloidal-Cellulose Nanofibril-Natural-Rubber-Latex Hydrogels.
    Branko Alič, Urška Šebenik, Matjaž Krajnc
    Gels (Basel, Switzerland)Peer-reviewedCC BYFull textMaterials & polymersEurope PMC
  3. Asphaltite Ash as a Mineral Filler in Bitumen: Physical, Rheological and Microstructural Assessment
    Ozgur Ozcan, Ahmet Saygin Tatar, Sedat Ozcanan +1
    ACS OmegaPeer-reviewedCC BY 4.0Full textGeneral chemistryCrossrefEurope PMC
  4. Cellulose Crystallinity in Orange Biomass-Derived Cellulose: Comparative Assessment by FT-IR, Solid-State 13C NMR, and X-Ray Diffraction
    Symone Costa de Castro, Matheus Signorelli Corrêa, Ljubica Tasic
    MoleculesPeer-reviewedCC BY 4.0Materials & polymersCrossref
  5. Acylals Derived from Acrylic Anhydride as Latent Anhydride Crosslinkers for Catalyst-Free Vitrimers
    Yasuhiro Kohsaka, Sumire Hayakawa
    ChemRxivPreprintLicence not statedGeneral chemistryChemRxiv

Cite

BibTeXRIS
BibTeX
@article{albertini2026biobased,
  title = {{Bio-based cellulose-filled vitrimers for 3D printing via liquid deposition modeling: Rheological tuning and environmental assessment}},
  author = {Edoardo Albertini and Mirko Busto and Sara Dalle Vacche and Gian Andrea Blengini and Marc Guerre and Alessandra Vitale},
  journal = {Chemical Engineering Journal},
  year = {2026},
  month = oct,
  doi = {10.1016/j.cej.2025.172399},
  url = {https://hal.science/hal-05445810v1},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Bio-based cellulose-filled vitrimers for 3D printing via liquid deposition modeling: Rheological tuning and environmental assessment
AU  - Edoardo Albertini
AU  - Mirko Busto
AU  - Sara Dalle Vacche
AU  - Gian Andrea Blengini
AU  - Marc Guerre
AU  - Alessandra Vitale
PY  - 2026
DA  - 2026/10/29
JO  - Chemical Engineering Journal
DO  - 10.1016/j.cej.2025.172399
UR  - https://hal.science/hal-05445810v1
SN  - 1385-8947
ER  -