Fabrication and Optimization of 3D-Printed TiO2/g-C3N4 Scaffolds for Degradation of Organic Dye and Pharmaceutical Pollutant
- 1Kasetsart University , , 50 Ngam Wong Wan Rd, Latyao , Chatuchak, ,
Abstract
The contamination of synthetic dyes in aquatic environments remains a major challenge because of their toxic nature and poor degradability under conventional treatment processes. Additionally, pharmaceutical residues such as paracetamol have emerged as persistent contaminants owing to their extensive consumption and continuous release into water systems, posing potential ecological and health risks. In this research work, we developed 3D-printed scaffolds embedded with TiO2/g-C3N4 composites to degrade methylene blue (MB) and paracetamol from aqueous solutions. TiO2 was synthesized via a hydrothermal method, while g-C3N4 was prepared through thermal polymerization. The various ratios of TiO2/g-C3N4 composites with varying mass ratios were fabricated to evaluate the effect of compositional variation on photocatalytic efficiency. The optimized composites were incorporated into photocurable resin and shaped into porous scaffolds using stereolithography (SLA). Structural and surface characterizations verified the successful development of uniformly dispersed TiO2-g-C3N4 heterostructures throughout the printed matrices. Adsorption tests in dark conditions for 30 min ensured equilibrium before light irradiation. Photocatalytic activity was assessed under UVA irradiation (λ = 365 nm) and demonstrated efficient degradation of both MB and paracetamol, with the optimized TCN (10:3) scaffold achieving removal efficiencies of 95% and 83%, respectively, within 210 min. Furthermore, reusability experiments revealed that the optimized scaffolds retained stable performance over five repeated uses. This work highlights the potential of combining heterojunction photocatalysts with 3D printing to develop reusable materials for the efficient removal of both dye and pharmaceutical contaminants from wastewater.
Related
- 3D Printing Polylactic Acid Porous Scaffolds for Bone Repair: Microstructure Optimization, In Vitro Degradation Behavior, and Cell Proliferation Performance
- Biomimetic Fabrication and Osteogenic Efficacy Evaluation of Tilapia-Derived Collagen-Based Artificial Bone Scaffolds
- Fabrication and Characterization of Chitosan-Integrated Polyvinyl Alcohol–Polycaprolactone/Tea Tree Oil Nanofibrous Scaffolds via Dual-Nozzle Electrospinning for Wound Dressing Applications
- Visible-light driven photocatalytic degradation of pharmaceutical and dye pollutants using CuS@Polythiophene nanohybrids
- Fabrication and Characterization of 3D-Printed Polylactide Composite Scaffolds with Modified Graphene
BibTeX
@article{soe2026fabrication,
title = {{Fabrication and Optimization of 3D-Printed TiO2/g-C3N4 Scaffolds for Degradation of Organic Dye and Pharmaceutical Pollutant}},
author = {Htet Yadanar Soe and Thanate Na Wichean and Gasidit Panomsuwan and Oratai Jongprateep and Ratchatee Techapiesancharoenkij},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c01780},
url = {https://pubs.acs.org/acsodf/article/11/41/62501/5448569/Fabrication-and-Optimization-of-3D-Printed-TiO2-g},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Fabrication and Optimization of 3D-Printed TiO2/g-C3N4 Scaffolds for Degradation of Organic Dye and Pharmaceutical Pollutant
AU - Htet Yadanar Soe
AU - Thanate Na Wichean
AU - Gasidit Panomsuwan
AU - Oratai Jongprateep
AU - Ratchatee Techapiesancharoenkij
PY - 2026
DA - 2026/10/10
JO - ACS Omega
DO - 10.1021/acsomega.6c01780
UR - https://pubs.acs.org/acsodf/article/11/41/62501/5448569/Fabrication-and-Optimization-of-3D-Printed-TiO2-g
AB - The contamination of synthetic dyes in aquatic environments remains a major challenge because of their toxic nature and poor degradability under conventional treatment processes. Additionally, pharmaceutical residues such as paracetamol have emerged as persistent contaminants owing to their extensive consumption and continuous release into water systems, posing potential ecological and health risks. In this research work, we developed 3D-printed scaffolds embedded with TiO2/g-C3N4 composites to degrade methylene blue (MB) and paracetamol from aqueous solutions. TiO2 was synthesized via a hydrothermal method, while g-C3N4 was prepared through thermal polymerization. The various ratios of TiO2/g-C3N4 composites with varying mass ratios were fabricated to evaluate the effect of compositional variation on photocatalytic efficiency. The optimized composites were incorporated into photocurable resin and shaped into porous scaffolds using stereolithography (SLA). Structural and surface characterizations verified the successful development of uniformly dispersed TiO2-g-C3N4 heterostructures throughout the printed matrices. Adsorption tests in dark conditions for 30 min ensured equilibrium before light irradiation. Photocatalytic activity was assessed under UVA irradiation (λ = 365 nm) and demonstrated efficient degradation of both MB and paracetamol, with the optimized TCN (10:3) scaffold achieving removal efficiencies of 95% and 83%, respectively, within 210 min. Furthermore, reusability experiments revealed that the optimized scaffolds retained stable performance over five repeated uses. This work highlights the potential of combining heterojunction photocatalysts with 3D printing to develop reusable materials for the efficient removal of both dye and pharmaceutical contaminants from wastewater.
SN - 2470-1343
ER -