Interface Engineering of Porous Transport Layer‐Catalyst Layer in Proton Exchange Membrane Water Electrolyzers: A Comprehensive Review
- 1School of Energy and Power Engineering Huazhong University of Science and Technology Wuhan China
Abstract
A proton exchange membrane water electrolyzer (PEMWE) represents one of the most promising technologies for green hydrogen production. Within the membrane electrode assembly (MEA), the interface between the porous transport layer (PTL) and the catalyst layer (CL) exerts a decisive influence on overall electrolyzer performance. The PTL–CL interface governs not only electron conduction efficiency and ohmic contact resistance, but also proton transport, oxygen bubble evacuation, liquid water supply, and the utilization of catalytically active sites. This review systematically examines the functional roles and resistance sources at the PTL–CL interface, and surveys recent advances in noble metal and non‐noble metal coatings, mechanical and chemical surface treatments, assembly compression optimization, microporous layer (MPL) and gradient porous structures, wettability engineering, and CL microstructure and composition optimization. Further discussion addresses future challenges including interfacial durability under ultra‐low iridium (Ir) loading, standardization of accelerated stress test (AST) protocols, and scale‐up manufacturing and engineering integration. This review aims to provide guidance for the design of high‐performance, low‐cost PTL–CL interfaces with practical scale‐up potential in PEMWE.
Related
- Electrostatic Stabilization of Near-Surface Quantum Sensors via Dielectric Interface Engineering
- Growth and Interface Engineering of Superconducting TiN on Sapphire by Thermal-Laser Epitaxy
- Graded Orbital Interface Engineering for Enhanced Damping-like Torque Efficiency
- Metallic-Phase-Fe3GaTe2 Enabled Interface Engineering for Self-Powered and High-Gain WS2 Photodetectors
- Interface engineering of spin triplet Cooper pairs for spin-valve implementation
BibTeX
@article{wan2026interface,
title = {{Interface Engineering of Porous Transport Layer‐Catalyst Layer in Proton Exchange Membrane Water Electrolyzers: A Comprehensive Review}},
author = {Aobo Wan and Zhengkai Tu},
journal = {Advanced Materials Interfaces},
year = {2026},
month = nov,
doi = {10.1002/admi.70684},
url = {https://doi.org/10.1002/admi.70684},
note = {CC BY},
}
RIS
TY - JOUR
TI - Interface Engineering of Porous Transport Layer‐Catalyst Layer in Proton Exchange Membrane Water Electrolyzers: A Comprehensive Review
AU - Aobo Wan
AU - Zhengkai Tu
PY - 2026
DA - 2026/11/06
JO - Advanced Materials Interfaces
DO - 10.1002/admi.70684
UR - https://doi.org/10.1002/admi.70684
AB - A proton exchange membrane water electrolyzer (PEMWE) represents one of the most promising technologies for green hydrogen production. Within the membrane electrode assembly (MEA), the interface between the porous transport layer (PTL) and the catalyst layer (CL) exerts a decisive influence on overall electrolyzer performance. The PTL–CL interface governs not only electron conduction efficiency and ohmic contact resistance, but also proton transport, oxygen bubble evacuation, liquid water supply, and the utilization of catalytically active sites. This review systematically examines the functional roles and resistance sources at the PTL–CL interface, and surveys recent advances in noble metal and non‐noble metal coatings, mechanical and chemical surface treatments, assembly compression optimization, microporous layer (MPL) and gradient porous structures, wettability engineering, and CL microstructure and composition optimization. Further discussion addresses future challenges including interfacial durability under ultra‐low iridium (Ir) loading, standardization of accelerated stress test (AST) protocols, and scale‐up manufacturing and engineering integration. This review aims to provide guidance for the design of high‐performance, low‐cost PTL–CL interfaces with practical scale‐up potential in PEMWE.
SN - 2196-7350
ER -